---

Last updated: Dec 8, 2021

Power On

1. Put the Ring into the Cradle.

2. Press and hold the Cradle button for ~3 seconds until the Cradle Status Light turns On.

3. The Ring will vibrate for ~1 second to indicate it is power on.

 

Power Off

1. Unplug the Cradle from any power source.

2. If the Ring is not on the Cradle, put it into the Cradle.

3. Press and hold the Cradle button for ~3 seconds until the Cradle Status Light is flashing green.

4. The Ring will vibrate for ~1 second to indicate it is power off.

It is not necessary to power off Belun® Ring unless it is going to be stored for a long time.