Scroll to top
©2021-2022 Belun Technology

Last updated: Dec 8, 2021

Pair your Belun® Ring with BelunSleep

1. Login your account

2. Press the Cradle Button once to wake it up if the Cradle Status Light is Off

3. Put the Ring into the Cradle (Press the Ring from the top until it clicks)

4. Tap the Ring icon at the top-right corner

5. Tap CONNECT in Device Information

6. App scans for all nearby Belun devices. Tap the one that is the same as the S/N printed on the bottom of your Cradle

   

7. The Cradle Status Light starts flashing blue

8. When the reminder below is shown, short press the Cradle Button to confirm the pairing

9. Pairing is done